Enclosures & Chassis

Steel Enclosure

11" High × 18" Wide × 19.5" Deep
Perfect for larger projects like a RF Power Amplifier.

• 5 rubber feet to support heavy internal components.

• Air intake fan on bottom panel.

• Ventilation slots in cabinet top near the rear.

• Rear panel has an IEC320 AC Input Connector,
   3 fuse holders plus screws and standoffs for
   mounting an assembly (like existing power supply).

• Existing switching power supply provides

5 V @ 3.0 A,   −12 V @ 0.17 A,   +24 V @ 2.2 A

Qty: 1$20 (without power supply)

$40 (with power supply)

The Power Supply is also listed separately on the
Switching Power Supply page.

Aluminum Enclosure

12.5" High × 16" Wide × 21" Deep
Perfect for larger projects like a RF Power Amplifier.

• Four 1/2" high rubber feet

• Reinforced bottom for strength

• The rear panel has a cutout for this AC Input
   & Filter Assembly which will be included
   (if still available).

• The rear panel also has a cutout for a 4" fan.

• Ventilation slots are in the sides near the front.

Qty: 1$40 (with the AC Filter Assembly)

or $20 (without the AC Filter Assembly)

OKW 9081087 

8.5"W x 6"D x 4"H

2 part high-impact polystyrene
desk top case with speaker grille for a 81mm dia. speaker (also available).
The base has pillars for locating PCB's.

0.37kg NEW    Qty: 1$25

OKW 9080087 

8.5"W x 6"D x 4"H

Same as OKW 9081087 above, but with an aluminum front panel.

0.40kg NEW    Qty: 1$25

OKW 

8"W x 5.5"D x 1.5"H

High-impact polystyrene with
front and rear aluminum panel inserts.

0.33kg NEW    Qty: 1$15

Hammond 9H CH GY

8.5"W x 9.25"D x 3.43"H

Height adjustable
in ¼" increments from 2.43" to 3.68"

0.88kg NEW    Qty: 2$25 ea.

Hammond 9H C GY

8.5"W x 9.25"D x 3.43"H

Height adjustable
in ¼" increments from 2.43" to 3.68"
Same as 9H CH GY above, but without a handle.

0.67kg NEW    Qty: 1$25

High-Impact Plastic Case

with front and rear aluminum panels

8.6"W x 5.5"D x 2"H

0.36kg NEW    Qty: 1$15

ARMACO UB6/EC2806

2 piece steel box with 4 rubber feet.

6"W x 2-1/2"D x 2"H

?kg NEW    Qty: 1$10

Hammond 1416E  NEMA 1

Ventilated Component Case

4"W x 6"D x 4"H

?kg NEW    Qty: 2$30* ea.

Both boxes plus 1 extra vented half - $55

Hammond 1411 Series
Aluminum Utility Boxes

Hammond 1411K

   5"W x 2.2"D x 2.2"H130g

 NEW  Qty: 1$ 5*

Hammond 1411S

   8"W x 4"D x 3"H280g

 NEW  Qty: 1$13*

Hammond 1431 Series
Steel Chassis Bottom Plates

Hammond 1431-22

12" x 8"

Grey ($9.40 list) 475g

 NEW  Qty: 2$5*ea. 3/$10

Hammond 1415J NEW
Steel Utility Enclosure

15"W x 9"D x 7"H
4.0kg

Qty: 1$40*

Extra Hammond 1415 Series Steel Enclosure Plates

Hammond 1415C

6" x 5"135g

  Qty: 2$3* ea.  2/$5

Hammond 1415E

9" x 6"250g

  Qty: 1$5*